Compensators KompN

Our products

This product brings completely new unique construction. Compensators of new generation contain conical partitions, which are pressed inside.

In design point of view, it is near to muzzle brakes, but functionally, they are counted among compensators. Muzzle brakes decrease impulse shot and gun recoil. Compensators influence deviation mainly while shooting and they also eliminate elevation of handguns.

Maximum possible drain of burnt gas is reached by conical partition shape. Burnt gas is used for recoil and stroke mitigation. The gas drain system is designed for highest reduction of gas whirling during combustion outflow. Thanks to this process, compensator and barrel swings are reduced. Undesirable swings may increase gun dispersion.

Dispersion size cause also additional gas effect while shooting. The shot in first flight phase, so called intermediate balistics, is additionally accelerated by flowing gas after leaving the barrel. This effect can be noticed maximally to 1 meter (or 20 multiple of calibre). Undesirablly, it has an impact to shot trajectory, especially in extended dispersion. Together with gas, also the rest of not burnt gunpowder flows from the barrel. The gunpowder burns as supplement, but it influences flying shot. If we reduce amount of flowing gas and suplemental burning, we increase stability of the shot.

Compensators KompN are manufactured in 3 sizes: Tactical, Combat, Harpoon; only for guns SA 58, AK 47.

KompN are designed to ammunition 7,62 x 39 ! ! !

All KompN types need to be fit together with the gun ! ! !

KompN1 Tactical – SA 58

Compensator for weapons SA 58 and their clones, in caliber 7,62 x 39.The smallest of the family of compensators KompN. Designed  primarily for tactical purposes, which partially absorbs recoil weapons, while extending the minimum length of the weapon.

Compensators series KompN work on the principle of channeling combustion gases through a conical counter.

Technical data:
  • Thread: M 14 x 1 RH
  • Caliber: 7,62 x 39
  • Length: 35 mm
  • Weight: 53 g
  • Material: steel
  • Surface finish: alkaline oxidized

KompN2 Combat – SA 58

Compensator for weapons SA 58 and their clones, in caliber 7,62 x 39. Suitable for common sport shooting, but also for combat operations. Two conical blocks ensure light recoil. The gun is well controllable also in burst mode. While testing on several guns, the middle of shooting target was not moved.

KompN2 Combat was tested by the SWAT team of Police of the Czech Republic.

Compensators series KompN work on the principle of channeling combustion gases through a conical counter.

Technical data:
  • Thread: M 14 x 1 RH
  • Caliber: 7,62 x 39
  • Length: 51 mm
  • Weight: 80 g
  • Material: steel
  • Surface finish: alkaline oxidized

KompN3 Harpoon – SA 58

Compensator for weapons SA 58 and their clones, in caliber 7,62 x 39. Suitable for common sport shooting. Three conical blocks ensure light recoil.
It is necessary to properly fix compensator on the gun. In case of free fixing, projectils may touch inside partitions.
Compensators series KompN work on the principle of channeling combustion gases through a conical counter.

Technical data:
  • Thread: M 14 x 1 RH
  • Caliber: 7,62 x 39
  • Length: 67 mm
  • Weight: 108 g
  • Material: steel
  • Surface finish: alkaline oxidized

KompN1 Tactical – AK 47

Compensator for weapons AK 47 and their clones, in caliber 7,62 x 39.The smallest of the family of compensators KompN. Designed  primarily for tactical purposes, which partially absorbs recoil weapons, while extending the minimum length of the weapon.

Compensators series KompN work on the principle of channeling combustion gases through a conical counter.

Technical data:

  • Thread: M14 x 1 LH
  • Caliber: 7,62 x 39
  • Length: 35 mm
  • Weight: 53 g
  • Material: steel
  • Surface finish: alkaline oxidized

KompN2 Combat – AK 47

Compensator for weapons AK 47 and their clones, in caliber 7,62 x 39. Suitable for common sport shooting, but also for combat operations. Two conical blocks ensure light recoil. The gun is well controllable also in burst mode. While testing on several guns, the middle of shooting target was not moved.

Compensators series KompN work on the principle of channeling combustion gases through a conical counter.

Technical data:

  • Thread: M14 x 1 LH
  • Caliber: 7,62 x 39
  • Length: 51 mm
  • Weight: 80 g
  • Material: steel
  • Surface finish: alkaline oxidized

KompN3 Harpoon – AK 47

Compensator for weapons AK 47 and their clones, in caliber 7,62 x 39. Suitable for common sport shooting. Three conical blocks ensure light recoil.

It is necessary to properly fix compensator on the gun. In case of free fixing, projectils may touch inside partitions.

Compensators series KompN work on the principle of channeling combustion gases through a conical counter.

Technical data:

  • Thread: M14 x 1 LH
  • Caliber: 7,62 x 39
  • Length: 67 mm
  • Weight: 108 g
  • Material: steel
  • Surface finish: alkaline oxidized